Robots Atlas>ROBOTS ATLAS
Robotics & Hardware

10 Hours Airborne Without GPS, Charged by a Radio Beam

Lady Robot19 November 2026 · 6 min read
10 Hours Airborne Without GPS, Charged by a Radio Beam

On 28 October, Reach Power announced the completion of a 10-hour autonomous drone flight powered by a radio beam. The demonstration combined onboard visual navigation, independent energy-management decisions and on-demand power delivery — without external intervention, a tether, GPS, flight-tracking sensors or manual controls.

Key takeaways

  • 10 hours of flight with no tether, no GPS and no external position tracking
  • The drone monitored its state of charge itself, left the beam and returned for power at a programmed threshold
  • The beam is steered electronically — the transmitter makes no mechanical movement
  • The result is roughly 400 times this configuration's battery-only endurance, which was 90 seconds
  • The flight took place on 22 September at the Virginia Tech Institute for Advanced Computing and was streamed to the Pentagon

Picture this situation

A drone is to watch a plant's perimeter fence all night. Small uncrewed aerial systems typically fly 30 to 40 minutes before a battery has to be swapped or recharged.

Twelve hours of surveillance therefore means a dozen-plus swaps. Each needs a person on site, a stock of batteries and chargers, and during the gaps there is no picture.

But here is the problem: the bottleneck is not the drone, it is how energy reaches it.

That is precisely the point Reach Power's demonstration targets. The surveillance hours above are an editorial example, while the 30-to-40-minute range for small uncrewed systems comes from the company itself.

What exactly was demonstrated?

The flight took place on 22 September at the Virginia Tech Institute for Advanced Computing, as part of the Energy Sentry 2026 event organised by Operational Energy-Innovation. According to Reach, it was the first commercial power-beaming demonstration streamed live to participants at the Pentagon.

The most consequential element, though, is not the flight duration but who made the decisions. The aircraft managed its energy autonomously: using onboard processing it monitored state of charge in real time, released the power link at full charge and moved off-beam, then returned and called for power at a programmed threshold.

The electronically steered beam reacquired the platform and restored in-flight power delivery. The whole cycle ran machine-to-machine, with no operator input.

Flight was sustained for 10 hours, which the company converts into roughly a 400-fold extension over the 90-second battery-only endurance of this test configuration. That baseline figure refers to a specific rig carrying the receiver, not an off-the-shelf drone.

Power
Drone draws energy from the beam
Is the battery full?
YES
Release the link and move off-beamAllow
NO
Keep drawing energy
Mission
Mission flight away from the beam
Discharge threshold reached
Beam reacquisition and in-flight powerAllow

This is a simplified view built on the company's description of the demonstration, not an independently verified flight record.

Why is a tether or a battery swap not enough?

A power-tethered drone flies routinely today and has no endurance problem. The cable, however, caps the operating radius and snags on obstacles, so the platform stops being mobile.

The second route is docking stations with automatic battery swaps. They work, but they need infrastructure in the field, and the drone has to land — so during a swap it stops watching.

The simpler option, a bigger battery, falls short because of physics: the extra mass eats the endurance it buys. It is one of those relationships where scaling stops working after a few steps.

There is a second problem this demonstration addresses separately. Previous persistent-flight demos relied on external tracking systems to hold the drone in position — infrastructure that does not exist in the field. Chris Davlantes, founder and CEO of Reach, stresses exactly that distinction.

Previous demonstrations of persistent drone flight have relied on external tracking systems or other controls to keep the drone in position. What makes this achievement different is that we flew a standard quadcopter in fully autonomous, untethered flight for 10 hours, without external flight controls or tracking equipment, and we could have gone for days.

Chris Davlantes, founder and CEO of Reach Power

How does such a transmitter work?

According to the maker's technical description, the system consists of a transmitter, receivers and control software. The transmitter is the hub: it holds an adaptive antenna array, a microcontroller unit steering the RF signals and managing receivers through a proprietary Bluetooth-based protocol, plus a communication module that works even without a clear line of sight.

The receiver carries antennas that capture the energy, power control circuitry, a storage element in the form of a battery or capacitor, and its own communication module. That split matters here, because it lets one transmitter serve multiple platforms.

Beam aiming happens in software. Software-defined electronics direct energy to the receiver without mechanical transmitter movement, which in practice means no moving parts in the aiming path.

The drone's components complied with NDAA requirements, and key systems were manufactured in the United States by ModalAI. Processing ran entirely onboard, in an edge AI model, and navigation relied on computer vision rather than a satellite signal.

What do these names mean?

Three terms needed to judge the result:

  • Power beaming — transmitting energy over a distance via a radio beam. The equivalent of wireless phone charging, only across a gap and aimed at a receiver.
  • Electronic beam steering — changing the beam's direction by phasing the signal across an antenna array, without rotating the transmitter. The equivalent of a radar with an active array instead of a spinning dish.
  • sUAS — small uncrewed aerial systems, the class a typical quadcopter belongs to. It is for that class that the 30-to-40-minute endurance range is quoted.

The first two together produce the effect that neither delivers alone: energy reaches a machine that moves on its own, with no mechanical tracking by the transmitter.

Is it working yet?

This is a demonstration at an industry event, not a deployed product. The flight took place on 22 September in the controlled conditions of a single facility. The company says product releases are coming but has given neither a date, nor range, nor delivered power, nor transfer efficiency.

Reach has received funding for several programmes through the Department of War's Operational Energy Capability Improvement Fund, administered through Operational Energy-Innovation. The programmes cover wireless power for uncrewed aerial and ground systems and other autonomous platforms, which places the technology on the path toward operational use.

The company also names applications outside defence: industrial robotics, infrastructure inspection and public safety — markets where battery limits hold back the productivity of autonomous systems.

Why it matters

The autonomy conversation centres on perception and planning models rather than on where a machine gets its electricity. Yet in continuous tasks it is power, not intelligence, that sets the limit. If energy can be delivered in flight and the drone negotiates its own charging windows, what changes is not endurance but the number of people needed to keep the machine airborne.

What's next

  • The company announces product releases without a date or figures for range and delivered power
  • Funding through the Operational Energy Capability Improvement Fund covers wireless power for ground platforms too, not only aerial ones
  • The missing data are transfer efficiency, range and behaviour with several receivers at once

Sources

Share this article